Extruded

Extrusion is a hot metal process of shaping aluminium through a tool or “die”. Both the billet and the die are heated before the billet is pushed through the die by a ram. From this point the aluminium must be cooled, straightened, quenched, and then cut. At this stage its in a soft form commonly referred to as T4. Its then hardened in an oven at around 180 degrees for 8 hours.

BGA

Our BGA products will suit a wide variety of demanding requirements to suit your needs. They come with a series of mounting options and customised hole patterns are available.

Board Mounted

Extruded profiles can be cut to length, machined and anodised to suit your heatsink needs. Most board mount and bga heatsinks are supplied black anodised to assist thermal performance.

Technical

Technical

ABL Components are able to offer a range which is nearly unparalleled in the supply of heatsinks with many products supplied from stock. The heatsink products are produced by an aluminium extrusion process where the fins are extruded separately and then assembled into the base plate via a patented technology.